LG / GOLDSTAR CE-20J3GX
Manual de Usuario

Picture adjustment
Picture adjustment
You can adjust picture contrast, brightness, colour intensity and sharpness to the levels you prefer. 1. Repeatedly press the MENU button to select the Picture menu. 2. Press the D / E button to select the desired picture item. 3. Press the F / G button to make appropriate adjustments. 4. Press the OK button to store it for the picture User. To recall your preferred setting, press the PSM button until the desired picture (Dynamic, Standard, Mild, Game or User) appears. The picture Dynamic, Standard, Mild and Game are programmed for good picture reproduction at the factory and cannot be changed.

Picture format
You can watch the TV in various picture formats; Standard, 16:9 or Zoom. Repeatedly press the ARC button to select your desired picture format.
Standard 16:9

This picture format is 4 to 3 of general TV. You can enjoy the cinema (the picture format of 16:9) or general TV programme through the 16:9 mode. The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and right so that the screen 16:9 is full.
Zoom

You can enjoy the cinema in a vast screen through the Zoom mode. The screen 4:3 is magnified to the upper/lower and left/right sides so that the screen 16:9 is full. The bottom and top of the picture may be lost.

Note : a. When you switch the set to standby or off, the 16:9 or Zoom picture format is reset to the Standard (4:3). b. In the manual AV mode, 16:9 picture format is not available.

Other functions
TV and AV modes
Inputs can be set for TV or AV mode. AV mode is used when a video cassette recorder (VCR), or other equipment is connected to the set.

Note : When a VCR is connected via the aerial socket the set is used in TV mode. See the �Connection of external equipment� section.
1. Repeatedly press the MENU button to select the Special menu. 2. Press the D / E button to select Input. 3. Press the F / G button to select TV or AV. The AV mode is : AV : VCR connected to the Euro scart socket on the back Alternatively you can select the TV or AV mode by pressing the TV/AV button.

Auto AV switching
If your VCR outputs switching voltage when it is switched to playback with the VCR connected to the Euro scart socket. The set is automatically switched to AV mode when an AV signal is input. But if you want to keep on watching TV mode, press the D / E or NUMBER buttons. Press the TV/AV button to return to AV modes.

Auto sleep
If you select Auto sleep On the set will automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting. 1. Repeatedly press the MENU button to select the Special menu. 2. Press the D / E button to select Auto sleep. 3. Press the F / G button to select On. 4. Press the TV/AV button to return to normal TV viewing.